Use the Right Software

One of the best things you can do to improve the quality of your PCB design is to use quality software for the creation. Of course, some might worry that software will be expensive or difficult to use. While this is certainly a potential problem with some pieces of software, it doesn’t have to be.

Advanced Circuits offers PCB Artist, a robust piece of software that can provide you with the guidance and tools you need for your PCB design regardless of how simple or complex it might be. It offers more than is found with most other pieces of software on the market that provide similar features. One of the best features of the software is the price. It is entirely free, so you will not have to worry about paying anything when you are getting started. Whether you are a hobbyist or working for a company, you will appreciate this benefit.

While the software will have a learning curve, like any piece of software, it tends to be easy to use. Those who have any experience with PCB design should not have a problem getting started with the intuitive software. When you use PCB Artist, you can create up to 28 layers on your PCB. It features Gerber format files, has design rule and check support, and a host of other helpful features.

The software does not take up too much computing power either. You will only need to have a Pentium processor that’s at least 1.8Ghz. You will also need 512MB of RAM and 1.26 GB of storage space on your hard drive. These small requirements should be achievable by just about any computer today. However, it does need to be a Windows computer because MAC and Linux are not supported currently.

The software can help to make the PCB design process faster and easier, but it’s important to realize that this is just a tool. You still need to understand the concepts of good design.

Streamline Your Circuit Design

One of the most important aspects of PCB design is keeping things functional, often through the simplicity of design. You don’t need to jam as many components as possible onto a single board. Instead, you want to be sure that you are creating a circuit that can perform the functions that you need without being too crowded. Think about what you need the circuit to do and design for that. Streamline the board, use good, basic design principles, and build from there.

Beware of trying to do too much on a single board. There is a chance for more to go wrong. There is also the worry that too many components could cause overheating if you don’t consider how it will be cooled.

The software can make circuit design easier and have a good representation of what it will look like and how it will work. You can often see issues that would come into play even before you prototype. Additionally, you can send the design for an engineering review. Advanced Circuits offers a free engineering review. This will give you a better idea of whether your PCB design will work or not.

Always Use a Prototype

Of course, the next step should be to prototype the board. Even if you have checked it virtually and the engineering review looks good, get a prototype. This will help to ensure that it is working properly in the real world. You can see how it fares in the case you have designed. You can see if there are overheating issues, if it doesn’t always trigger properly, etc. The testing will give you a better look at the board and the areas where you might need to make some changes.

In a perfect world, you will find that the prototype works without a problem. If that’s the case, you can move on with manufacturing. However, if there’s an issue, it is better to know now, so you can go back and fix it and then test again before unleashing your PCB design into the world.

Use Advanced Circuits for Your Manufacturing Needs

Advanced Circuits is one of the largest PCB manufacturers in the country. We have decades of experience and can provide you with everything you need from start to finish. Not only do we have the free PCB Artist software you can use for the PCB design and free engineering reviews before you go into manufacturing, but we also have quality manufacturing facilities. We can be the “one-stop-shop” for all of your PCB needs.

As the third-largest manufacturer of PCBs in the United States, we provide a fast turnaround time, so you can get your boards quickly once you place your order. You will be happy to know that there is no minimum order either. This will make it easier for you to get those prototypes you’ll want to use for testing.

Advanced Circuits is not a broker. All of the work is done in-house at our facilities. This includes the manufacturing and assembly of your PCBs. We have a fantastic shipping record, we’ve been around for years (so you can be sure we aren’t going to disappear overnight), and we strive to make the entire process as easy as possible for you. Contact us to learn more and to get a quote. We are looking forward to helping you with all of your PCB design needs.

Use Software to Design the Circuit Boards

Modern software has helped to make it easier to design printed circuit boards. It has cut down on the amount of time it takes, not to mention the number of errors that would need to be fixed. Software, such as Advanced Circuits’ PCB Artist, will make it nice and easy to create just the board you need. The software will let you create your circuit boards virtually. You can add and remove components as needed and test them in the software to get a better sense of how they would work.

This is a nice benefit for designers. It allows for the creation of a range of interesting and new designs far faster than it would be with a breadboard. It’s possible to find problems and errors in the board even before it goes into prototyping. It becomes possible to save time and money, which is helpful for anyone whether working as a hobbyist or creating circuit boards for the latest and greatest electronic gadget.

If you want to have the best possible design for your circuit board, our PCB Artist software is an ideal solution. Even better, you will not have to pay anything for the software. It is available at no cost to those who need to use it. You can use it to create the files for your circuit boards, and then have them sent to us to be manufactured. We even provide a review of the files to ensure they are ready to be made. This cuts down on potential errors even further.

The software we offer is intuitive and easy to use. If you have any experience putting together circuits, even minimal experience, you should not have any trouble with it.

Always Use Good Design Protocols

One of the issues that some designers come to find when they are creating circuit boards is crowding. Boards today have the potential to do quite a bit. However, there is often the temptation — especially with new designers — to put too many components onto the PCB. While it might seem like a good idea to make the best use of space, too many components could be a problem. Typically, these problems will arise during the testing phase. Therefore, you will want to be sure that you do plenty of testing.

A better option is to think simpler. Consider what the circuit board needs to do and make sure it can do that with as few components as possible. It might mean needing an additional board or even redesigning the device. Still, finding the cleanest design possible tends to be the best option. It can reduce problems later.

Also, consider how the components are mounted on the board, along with your trace angles. It’s a good practice to use 45-degree trace angles. This can help to reduce the amount of overcrowding that you might have otherwise.

One of the main problems that can come from overcrowding a board is overheating. If there are too many components on the board trying to do too much, there is a good chance it will overheat. Even with the fans that might be in the device already, there is still a chance that it could overheat. It’s best to use the right design principles and protocols in the first place rather than trying to add more fans to keep things cool with your circuit boards.

Check Your Prototype

Once you believe that you have a great design, you will want to order a prototype. You should test this prototype (or several of them) in real-world situations with your device. See how they work in practice, not just in theory. This will give you a chance to see if there are any issues that weren’t discovered during design. It’s better to realize that you have a problem with overheating on your prototype before you order 5,000 units from the manufacturer.

If you notice there are issues, it’s time to head back to the drawing board and make some changes. However, don’t jump the gun and think that those changes were all you needed. It’s best to err on the side of caution and to continue with another prototype round. Test it again and put it through all of its paces to ensure it will work properly no matter what you put it through.

Choose a Quality Manufacturer

Ideally, you will have chosen a great company to make your prototypes that can also manufacture all of the circuit boards you need. This will be a better solution than trying to find two different companies. Fortunately, Advanced Circuits can provide you with what you need. You will be able to use the free software and take advantage of the engineering review. You can order some prototypes to see how it all works, and then you can place your main order.

You will be happy to know that we have some of the best and fastest service in this field. You can often get your orders within days of placing them. We strive to make it as easy as possible for you to get high-quality circuit boards quickly and easily, and at prices that you can afford. We work hard to ensure that you get the best possible service no matter the size of your order. To stress this, we don’t have an order minimum. Order as many or as few as you need. Get in touch to learn more.

Why PCB Design Matters

Why is PCB design such an important consideration? Simply put, it affects all aspects of the electronic device. If the board is designed with the wrong materials, if the traces are not correctly routed, if the vias are not properly designed – the board will either not work, or will not work as expected. That could lead to problems as basic as a lack of functionality, or as dangerous as overheating.

The key to PCB design is software. However, the market has grown immensely in the last few years. How do you choose the right PCB design software for your needs? We’d like to offer a helping hand here by outlining the things to look for in PCB design software.

Ease of Use

The first consideration has nothing to do with feature sets, automation, or component libraries. Instead, we’re going to focus on how easy the software is to use. Of course, ease of use is a deep topic and touches on everything from the intuitiveness of the user interface to the ease of accessing tools and features. It is also one of the most difficult qualities to quantify.

We’ll limit our discussion here to a simple formula: the number of clicks, keystrokes, and mousing required to achieve a goal. The more clicks, keystrokes, or mouse movement necessary to complete a step, the less easy to use the software is. The fewer clicks, keystrokes, and mouse movements necessary, the easier the software is to use.

Why does this matter? Simply put, if you have to click, hit multiple keys, and then move the mouse several times to accomplish a common action, it will require a significant investment of time and effort. Instead, look for PCB design software that helps streamline common actions to save you time and hassle.

Learning Curve

This is tied directly to ease of use but also touches on other aspects, such as design language (not coding, but the way the software is designed with users in mind), and more. Shorter learning curves mean you can get started using the software sooner. Steeper learning curves mean increased time learning how to do things within the program. Shorter learning curves are always preferable, as this ensures you’re able to hit the ground running. However, make sure that you’re not sacrificing features for a shorter learning curve.

Feature Set

The feature set offered is a critical consideration with any PCB software. While features and capabilities vary dramatically from one software option to the next, there are some commonly needed features to look for, as well as nice-to-have options that make one option stand out from the others.

• Component Library – A robust component library helps reduce design time by allowing you to drag and drop commonly used components from the library onto your board design. However, to get the most value from this feature, you must know the components your board will need and then verify that they’re included in the library.

• Layers – How many layers can the software handle? While simple PCB designs might call for just a few layers, complex boards that support multi-functionality will require many layers. Today, most PCB software can handle multiple layers, but it is important to verify that the option you are considering matches your design complexity.

• Simulation – Any PCB software worth considering should provide you with a simulation function. Essentially, once you finish designing the board, this feature allows you to test operation and model usage scenarios. It is important for identifying potential flaws in traces and vias, components set too close together, verifying heat resistance during operation, and so much more. Without an ability to accurately simulate real-world use, you’re relying on guesswork.

• 3D Modeling – Three-dimensional modeling capabilities are vital to creating an optimized PCB. This feature allows you to get a bird’s-eye view, but also to zoom in on the smallest features of your board. From component placement to lamination, layering to design changes, 3D modeling offers powerful capabilities that every board designer needs, whether you’re creating a single prototype or gearing up for a full production run.

The Cost Factor

Finally, let’s touch on cost. Robust PCB design software can be costly. Those costs can rise even more when you factor in add-ons, such as multiple user licenses, or limits set on the number of signal layers or pins. However, many engineers assume that PCB software must come with a high price tag to be worthwhile. The truth is that cost is not always an indicator of quality or capabilities. In fact, free PCB design software can be both high-quality and highly capable.

Free PBC Artist Software

At Advanced Circuits, we’ve led the PCB industry for decades and understand the complexity of finding the right PCB design software. In addition to our groundbreaking production capabilities, we also offer access to PCB Artist at no cost. It supports native Eagle import, multi-page schematics, controlled auto-router, up to 28 layers, and comes with a library of over 500,000 parts. All that, plus it’s unrestricted and requires no licensing fees.

Contact us today to learn more about our free PCB design software or our capabilities when it comes to board manufacturing and assembly.

They should get quality work with a quick turnaround time while having someone they can talk to who helps ensure they stay competitive against other companies. However, knowing what they need from the PCBs for their circuit designs doesn’t always mean it’s easy to immediately find the right company to step into their corner. We’ll share a few tips to make that process easier.

Know the Right Questions That Should Be Asked

When a person chooses someone to create their PCBs, it’s essential to ask them questions to be sure they can handle their needs. Sometimes the answers to the questions can be found on company websites and reviews. Other times individuals might need to contact the company on their own and ask the questions that are important to them. Having answers will provide peace of mind that they’re choosing the right company for their needs.

How Much Experience Does the Company Have?

Experience is important for any product or service that someone chooses to pay for, whether that’s a car repair or PCBs to fit their circuit designs. When it comes to printed circuit boards, a manufacturer’s experience is essential to ensure customers get boards that are right for their needs. Knowing how much experience a company has will give insight into how many resources they have and what amount of knowledge is available. It also shows competence if a PCB company has been in business for a long time. That means they have adapted to the times and continuously put out great products.

What Certifications Does the Company Have?

This is another question that can speak to how qualified a company is with PCBs for a person’s circuit design. Certifications typically require a third party to verify that the company complies with certain standards or requirements. For example, IPC creates standards with regards to PCBs and industries related to electronics manufacturing. Any company someone decides to work with should be capable of meeting the standard required by their products and industry. This includes broad regulations as well as those that apply only to their industry. The best choice is a company that has experience working with other people in the same industry.

How Does the Company Stand Out?

This might seem like a broad question that could have any number of answers, but it can help people narrow down the right business to help with their product. This is especially the case when they have a few options for companies that offer all the services and products that they need. This question can be as simple as asking what makes the business different from others or can delve into what value-added services are provided. For example, Advanced Circuits can help with their circuit designs by providing free PCB design and file check software which will save customers money and time.

Important Considerations When Choosing a PCB Company

The reality is that there are tons of companies that provide PCBs and many of them also have services to assemble and create circuit boards that match specific needs. This can make it a challenge to choose between them since some companies may appear to be quite similar. However, there are a few things people can look at early in the search to get a grasp on which company may best fit their needs.

Types of Products Provided

The first thing for people to check is what products are offered by a company to be sure they even provide what is needed. If the company specializes in the needed products, that’s even better. Once they know the products exist, they can find out more about the pricing and quality of the products.

For instance, what kind of PCBs are available? These can range from rigid to flexible and rigid-flex. They might be metal core, aluminum backed, or hybrid board. People can ask about which substrates are used in the board. They can also look into the quality and consider the prices and how they stack up to the competitors. All of these things can help with the decision.

Services Available

In addition to products, people should consider services that they might need. If the company offers everything they need, they won’t have to go between businesses to get their product ready. Some of the services that should be considered are:

• Prototyping – Ability to create prototype PCBs before moving into production so customers can reduce costs and timeframe through thorough testing.

• Layout and Design Services – These can speed up their production by offering a complete design or providing software to make someone’s own designs.

• File Review – File reviews can help by ensuring a design is free of errors and that the company has all of the needed components to start creating its PCBs.

• SMT Prototype Stencils – Stencils are laser cut and made of stainless steel foil to ensure the solder is placed in the right areas of the PCB. The stencil helps with accurate circuit designs.

Other services that can be helpful include DXF to Gerber conversion, panelization, and PCB design for manufacturing services.

Accessible Capabilities

It’s also important to be sure the company is capable of offering what is needed for a customer’s PCBs. This includes everything from being capable of handling the size of their order to having a certain lead time and offering the right layers on a PCB. Other things to consider are the surface finish options available, the via options, specs and tolerances, and other things that they prioritize with their circuit designs. It might take some time to get answers to all these things, but once someone does, they will know whether a company is right for them.

Advanced Circuits is the third-largest manufacturer of printed circuit boards in the United States and offers excellent customer service and reliability. The company also offers a variety of services to customers like free PCB layout software (PCB Artist) and a free PCB file check. Those who want a streamlined PCB company in their corner can get in touch with us to learn more.

When working with circuit design and creating printed circuit boards, many best practices can prevent having to continually alter and change the boards. Some of them are common knowledge while others might teach you something new that you can incorporate into your next PCBs. We want to focus on tips that will make a huge difference in your creation process and let you speed up your work.

Consider Orientation, Space, and Accessibility

One of the best tips we can offer you with circuit design is that all the components that you add to a board should be given a bit of space between each other. It might seem satisfying to place every part right next to another, but you also need room for wires to spread out. Keep in mind that components with fewer pins will need less space. Having extra space can also help with auto-routing since soldering will be simpler.

You also need to think about the orientation of parts when you place them. In general, the best tip here is that components should have the same orientation as each other. There’s a good reason for this practice. In most cases, the parts have a standard pin number system where pin one is found in the left upper corner. When orientation is the same between parts, it will prevent later mistakes in soldering and inspections.

Accessibility is also crucial, especially for nodes that are the most important in your build. Even when you have a great design and have gone through prototyping with products from a company like Advanced Circuits, you might do testing and see something isn’t working the way it should be. You’ll want to measure the signal in the PCB during the circuit design process. Be aware when designing the PCB about what points will be most important to troubleshoot and make them accessible. If this isn’t possible, make sure a test point is connected to them.

Check Component Sizes, Exchange Wiring Directions, and Select Line Widths

When you have an idea of how you want to lay out your components during circuit design, one option is to print out the layout. You can then take the parts and place them on top of the page to make sure they match. In some cases, this can save a ton of time since datasheets aren’t always 100% accurate. Another option is to use the free circuit board design software by Advanced Circuits to ensure your build is exactly the way it should be.

Assuming you are making a circuit with several layers, it’s best to swap the wiring directions as you go between the layers. For instance, one side of the layer might have horizontal traces while the other side uses vertical traces. This is an important tip since it helps facilitate the wiring or lines that need to pass over others. Alternate direction when using several layers for the best results.

PCB width will vary based on your project. A larger width is going to reduce the level of resistance, which means that it will also create less heat. It’s important to choose the width of lines you are sizing based on how much current is expected to flow through them. Several online calculators can help with this process. As you might guess, power lines should have more width than other lines since they will carry a larger amount of current.

Special Considerations for Power Circuits

When creating a power circuit, the number one tip is to ensure your power and control grounds remain separate. Large current spikes and high voltage can create interference in the control circuits, which aren’t designed to handle as much current and voltage. This is the main reason that the control ground and the power ground should be kept apart in any power supply stage. If they need to be tied together, it should be toward the end of the supply path.

For those who need circuits with several layers, it’s best to place the control ground somewhere in the middle layer during circuit design. The power traces can be placed on the top layers, while the bottom layer can handle the control traces. There’s a genuine reason to lay out your circuit in this manner. The middle layer will have a large ground path that helps prevent interference from the power circuits for better protection.

While this applies to any type of PCB, it is most important when designing and creating a power circuit. You want to ensure the width of the wire for the power supply is sized based on how much current will go through it. The reason this is essential is that a wire that is too small can generate additional heat and damage or destroy the wires.

Let Professionals Handle the Hard Work

Whether you are creating a prototype or the final PCB for a circuit design on a product you want to offer, there are many things that can go wrong. That’s precisely why working with professionals can be a great idea. Companies like Advanced Circuits have decades of experience and understand the ins and outs of PCBs. The company can manufacture PCBs of all sizes and levels of complexity to make your life a little easier.

As we mentioned earlier, Advanced Circuits provides software to design PCBs. They also have a FreeDFM file check, PCB Artist software, and more. The company has been leading the PCB industry for more than 25 years and has high-quality standards using the most innovative technology. Whether you need a small number of PCBs or tons of them for a major project, we can offer you a solution that meets your needs.

Using the Right Software for the Design

One of the benefits of technology is that it has made many aspects of circuit design faster and easier. In the past, the design could take a long time simply because of the tools being used. However, quality software in recent decades has helped to streamline the process. This makes it possible for engineers and even amateur circuit designers to put together workable designs in a fraction of the time it used to take.

You always want to start with the right software, but you don’t want to spend a fortune on it. To make matters easier and more affordable for you, Advanced Circuits offers PCB Artist. This is design software that will make laying out and designing PCBs much easier.

The software contains a library with more than half a million parts. It also features native Eagle import, multi-page schematics, a controlled autorouter, and the ability to create circuits with up to 28 layers. The software is easy to use and contains a host of features to make the process of circuit design simple. Best of all, this software is entirely free. It can be downloaded and will run on most computers without issue.

When you use the software, you can create a design in less time and with less expense than you would with other pieces of software. You can also submit your design to Advanced Circuits for review. The engineers can see whether it has any issues and can fix them or point them out to you before you place an order.

Why You Need to Prototype

Too often, people and companies try to rush through the design process even though they know better. They want to get their products to market as soon as possible. However, this often backfires on them. They end up with a lackluster design that’s not as good as it could be. Yet, they’ve already moved on with manufacturing and now have thousands of those circuits they need to use.

All of this could have been avoided had they only taken more time with the design and ordered prototypes to see how they work when they are used in real scenarios. Once you have a design that you like, place an order for the prototype. When you order through Advanced Circuits, there is no minimum order. It makes it easy for you to get a couple of prototypes that you can test.

Take a moment to think about the problems that could arise if you don’t take the time and put in the effort to prototype. You could get PCBs that you believe are ready to go. You might add them to the devices you’re selling, package them, and ship them out to your customers. Everything might seem right on track for a month or so, and then the PCBs start to show design problems. While it’s always possible for a PCB to fail for one reason or another, there shouldn’t be mass problems across all of your devices. If this happens, how many more times do you think your customers will buy from you?

This could cost you a lot of money, all because you didn’t take the time to get the design right. It’s often better to slow down on the design process to ensure that the circuit design will work properly.

Get the Circuit Design Right

Make sure you have a circuit that is capable of doing exactly what you need it to do. Get your prototype and put it through the rigors of the real world, so you can see how it behaves. Make notes and see if there is anything else you might need to do to the circuit design to improve it.

If you find some elements you could fix, move back to the design stage, and then get another prototype. If you are certain the design is as perfect as it can be, however, you can move on to the manufacturing stage.

Advanced Circuits Offers Manufacturing

You’ll be happy to know that Advanced Circuits does more than just provide quality software, engineering review, and creation of your prototypes. We’re a full facility that can manufacture as many circuits as you might need. If you are a small company or an individual, just order what you need. If you have a larger company and you need to place an order for thousands or tens of thousands of PCBs, we can help with that, as well.

You won’t have to wait long to get your boards, either. We’re the third-largest PCB manufacturer in the United States, and this means that we can provide you with a fast turnaround no matter how many PCBs you order. We can take care of the manufacturing and assembly of all of your printed circuit boards and ship them right to your door.

We pride ourselves on being a reliable company and providing our customers with the best service possible. This is why we provide free quality software for circuit design. Buyers will also be happy to know that we aren’t a broker. We don’t farm the assembly and manufacturing process out to others. We do everything right in our own facility.

Advanced Circuits has the best on-time PCB shipping record, so you can be sure you’ll get your PCBs when needed. And, because we’ve been around for many years, we’re financially stable. You won’t have to worry about us disappearing in the middle of an order. Get in touch for a quote today to see what we can do for you.

The Pros of Prototyping Board Design

Although the world of technology moves quickly, it also moves intelligently, or at least it should. This means that before a circuit board can be used in electronics, it should go through plenty of testing to ensure it does what it is supposed to do. The best way to do this it by prototyping the board design.

Going through a prototyping phase allows you to see whether there are any issues with the board that will arise when it is being used. You can note the errors and places where you can make improvements to the board before going into full manufacturing mode. Once you have your design created and sent to Advanced Circuits, for example, our engineers will test the design. This helps to ensure that everything is working as it should.

You will also find that prototyping the board design will help you to save time and money. If you find that there is a problem with the board early, it will be easier for you to make changes to get the board to where it needs to be. You won’t have to worry that your boards don’t work and that you will have to go back to the proverbial drawing board after you’ve ordered a few thousand of them.

You will also have more peace of mind knowing that your design works even before you place an order for one. This makes projects far easier to handle from the design perspective, as well as giving you confidence in your design.

The Cons of Prototyping Board Design

There aren’t many cons when it comes to using prototypes. However, it will depend on how you prototype the board design. If you are using a breadboard, which is what many people do because it’s relatively simple and it is how many people learned, it can cause problems.

The problems stem from the fact that these breadboards tend to have limitations compared with prototyping a board using software. They tend not to be a good option if you are working with a design that has high voltage or that is extremely complicated. It can also be difficult to “map” exactly what you are doing, and this could lead to mistakes down the line. Software, on the other hand, can catch these issues and eliminate them before you have a test board manufactured and sent to you.

You will also find that breadboard prototypes have trouble dealing with higher and more precise frequencies. Since boards today utilize surface mount technology that thrives with higher frequencies, it might be difficult to make a viable prototype using a breadboard. The breadboard strips also typically have a high resistance and could cause stray capacitance that can cause problems with the prototype. You might end up with a board that should work but doesn’t, simply due to the limitations of the board.

Fortunately, you can use software that can help to mitigate the problems of the standard, traditional breadboard.

Prototyping Board Design Using Quality Software

There are many software options available today for designing printed circuit boards. While we might be biased, we believe that our option, PCB Artist, is the best. It helps make the prototyping and the design of boards much faster and easier. It allows you to test out different designs and components to ensure everything on the board works well together and it can provide the results you need.

While there are some expensive PCB software options available, this doesn’t mean that they are the right choice. Because we offer a full manufacturing facility, and we want to make sure our customers get exactly what they need, we provide our software free. You won’t have to pay anything to use PCB Artist.

Just because the software is free does not mean it lacks in features. We have more features than the paid software many people are using. This is a fully-featured piece of design software that offers free, live technical support.

It’s professional-grade software that is sure to provide you with a faster and easier method of designing your boards. Some of the features of the software include a controlled autorouter, component autoplace, individual colored nets options, ratsnest connections optimization, and multipage schematics.

Once you design your board, you can test it to make sure that it works. We even provide a free engineer review to ensure it will work. If you would like, you can then order a handful, or even just one of the boards. It can be sent to you so you can then put it through its paces and make any changes that could be needed to improve the board.

Our goal is to make the process of getting quality boards that work as simple and as fast as possible. You will never have to use another plastic breadboard again.

What’s Right for You?

Unless you are 100% certain that your boards are perfect and that there are no potential issues that could arise, you should consider getting a prototype. It allows you to look for any small details that you might have missed. It’s always better to be safe than sorry.

Take the time to check out Advanced Circuits to see everything that we have to offer in addition to the PCB Artist software. Our manufacturing facilities are state-of-the-art, and we can provide you with a fast turnaround no matter how many boards you might need to order once you are sure your prototype works. Learn more about our services and facilities to see why we might be the right solution for your needs.

You need to take your time to think about just what you need the board to do and the components that will be required. You also need to consider the benefits of having a prototyping board that you can use before you move on to manufacturing on a large scale. Even if you only plan to have a relatively small run of boards, using a prototyping board to ensure that everything is just right is essential.

Let’s look at some of the biggest benefits that a prototyping board can provide.

What Makes Using a Prototyping Board a Good Solution?

No matter how long you might have been designing PCBs, you know that there is always the risk of making a mistake during the design process. This is truer today than it was in the past because the PCBs have become so complex in recent years. Mistakes can do more than just be an embarrassing moment for a designer. They can cost a company a substantial amount of money. They can cause delays in manufacturing, damage to the electronics they are meant for, and more.

Prototyping boards is a way to reduce the risk of making these types of mistakes, whether they are large or small errors. Prototyping the board is made easier when you utilize quality software, such as PCB Artist from Advanced Circuits. This software is free and has a full range of features to make creating the board as simple as possible. There is a large component library, and it allows the designers to tweak the design until it is as perfect as it can be. They can then send it to Advanced Circuits for a free review from the engineers to see if there are any hidden issues.

Once they are satisfied that the board will work properly, they can then move on and order one or more physical boards. There is no minimum order through Advanced Circuits. This means that you can get just one or a handful of boards to test in real-life situations with the electronics. You can see if there might be hidden issues or if there are problems with overheating, speed, etc. After you are sure the board works well, you can move on from the prototyping board and order as many as you need.

While this might seem like it adds some steps to the process, consider the alternative. If you believe that you have a good board and order 4,000 PCBs for the electronic devices you plan to ship, what happens when they don’t work? What if they cause overheating issues? Your customers would be irate, naturally. Prototyping and testing help to reduce these types of expensive problems.

When you order through Advanced Circuits, you will also find that we have a very fast turnaround time. Whether you are placing a large order, or you just need one board, they can be delivered to you quickly. It’s the best solution. You will reduce issues and you could even reduce the manufacturing costs.

Why Choose Advanced Circuits?

We understand that you want to make sure that your boards are working properly and that you receive them quickly. Advanced Circuits is one of the top manufacturers in the country and we have a very fast turnaround time, regardless of how many boards you might be ordering. If you only want to order a couple of your initial boards as prototypes, so you can see how they work in practice, you can. You could even order just a single board if you would like, as there is no minimum.

Additionally, we utilize high-quality materials. You can rest easy knowing that only the best quality components will be going into the boards you design.

We Make It Easier with Great Software

Most circuit board designers today know that it is best to use software that can help to design the printed circuit board rather than trying to use a breadboard. However, that software can be hit or miss. Sometimes, it can be extremely expensive.

Fortunately, we have a solution that’s available for you, as mentioned. Best of all, you won’t have to pay anything for the fully-featured software. Our software, PCB Artist, has features that you won’t find even with some of the expensive options.

We have a large library that you can use for designing the prototype. It features more than half a million parts. With the software, you can create up to 28 layers, which should be more than enough for most designs. It utilizes Gerber format files, and it is easy for you to check your work to make sure the board is working properly.

It is an easy-to-use piece of software that can change the way you work, and it can even speed up the process. If you don’t have a powerful computer, you don’t have to worry. Even a relatively modest computer should not have any trouble running the software, and you only need half a gig of RAM. Most people who have even a passing familiarity with this type of software will be up and running in no time.

Prototyping Boards Make Your Life Easier

Ultimately, you want to prototype your boards to make the process as simple as possible. Advanced Circuits can help you with each step along the way. You have the idea, and then you can design it with our software. Our engineers can check the design and you can move forward with the manufacturing once you are certain the board is what you need. Whether you need to order a large number of the boards, or you only need a few for a special project you are doing, we make it nice and easy. Get in touch with us today to see what we can do for you.

Always Test Your Circuit Design

One of the problems that cause delays and added costs to many companies is not ensuring that their boards are the best they can be before they go into the manufacturing phase. Even the most talented people can make small mistakes on their circuit design, which can cause a host of problems.

Rather than ordering a large number of these PCBs, it makes far more sense to take a step back and ensure that the design is correct first. Prototype the board and get a sample of the board to test out. This will let you know not only whether it works, but whether there might be some small design changes and tweaks that you could make to improve it further.

Do you have enough space between the components? Are you getting too much delay? Does the board become too hot? Look for the various ways that you can make some changes and improvements to your design, and then create another prototype, or at least have it checked by a third-party engineer, such as one of the specialists at Advanced Circuits. Doing this ensures that you have the best possible design. Only then should you move ahead with production.

Use Software to Make Circuit Design Easier

The world has changed, and technology has improved in many ways thanks to PCBs. With these changes, it means that the boards and circuit design is becoming more complex. The simple breadboards that were used for prototypes in the past may not be able to handle what you need in terms of your prototype circuit design. Instead, you will want to make sure that you are using software that will help to make the process of designing faster, easier, and more accurate.

If you are worried about the cost of this type of software, it’s understandable. Some of the software options that people use cost thousands of dollars. However, that’s not the case with our software, PCB Artist. We don’t charge anything to use the software, and it will work on computers that have a Pentium processor faster than 1.8 GHz and that have 512MB of RAM. The installation will take up 1.26GB on the hard drive, but most computers will have plenty of space to spare.

Just because our software is free doesn’t mean that it is lacking in power and features. We have a fully-featured program that has elements that you won’t even find with the expensive software options. Why do we offer the software for free? It’s simple. We want you to create high-quality boards that are ready to go. We want to make the process as simple as possible for you because it also helps us.

The software features hundreds of thousands of parts in the library. It’s easy and intuitive to use, and it can help to reduce the amount of time that it takes to go from an idea to a completed prototype and then to the manufacturing phase. Check out the software to see how much easier it will be to improve your circuit design.

Double-Check the Board

You believe that you have created the perfect board. Using software and prototyping as we suggested, that might be the case. However, you still don’t want to rush to the manufacturing process quite yet. Take some time to test the board in a real-world setting to see how it performs. You might find that you need to make just a few more small changes to improve the quality and efficiency of the board. While the board might work “just fine”, you should strive to ensure it is the best possible quality. This means double-checking the board to see if there may be ways to improve its speed or heat dissipation, for example.

If there are some changes you can make, apply them to your design, and get another prototype. Test it out until you are satisfied that it is exactly what your electronics will need. After all, you do not want a workable circuit design. You want an extraordinary design. Your customers, whether they are retail consumers or the military, will be glad that you did.

The Right Manufacturer Makes a Difference

Once you are certain that the board is in perfect shape, you can move ahead with manufacturing. However, you can’t simply choose just any manufacturer for the job. You need to be sure you are working with the team that can provide the best assembly and the best materials for your boards. Always take the time to investigate the history of the company and its size. You want a company that can provide you with what you need.

Advanced Circuits provides state of the art facilities and only uses high-quality materials for the creation of the boards. You have the option of ordering as many or as few boards as you need, and we can always provide a fast turnaround time. Often, you can get boards in a matter of days, which can help to speed up your manufacturing process. We have the best PCB shipping record in the field.

We are a top-rated PCB manufacturing company that is financially stable. You won’t have to worry about Advanced Circuits cutting corners or going out of business. We strive to be as efficient as possible in all of our departments. We even have 24-hour tech support, so you can always get in touch with a specialist regarding your project. Visit our website today to receive an instant quote online. We make things as easy as possible for you, so you can be sure you have the best circuit design.

Smaller Components Mean Smaller Products

Those who are looking for a smaller option for circuit boards will find that HDI PCBs could be an excellent solution. When designing circuit boards that use this technology, it allows for more components to be included in a smaller space. They can be populated on both sides of the board, so they can do more than a standard board that is the same size.

Since the technology allows for smaller circuit boards, but still manages to provide ample space and options, it means smaller end products. Using less space without compromising the quality and features is important to many designers today.

A Range of Applications

Smaller designs that are still powerful and capable are important for many different types of products across industries today. Whether the designer is working on a new smartphone, medical equipment, military tech, or aerospace tech, going smaller is often the goal.

One of the areas where HDI PCBs are making a big impact is in the medical industry. Many types of medical devices need to be small. This includes implants, equipment for the lab and for imaging, and more. Smaller sizes are helpful, whether it is for a pacemaker, a camera used for medical imaging, or another piece of equipment used by medical professionals.

Of course, there are plenty of other industries that are making good use of these smaller boards. The automotive industry, for example, uses these types of boards in many of their vehicles. Because they are smaller, they will take up less space in the car. This means that more technological features could be added to the vehicles while still taking up less space.

Military and aerospace applications are growing, as well. From defense systems to missiles and more, these smaller circuit boards are making a difference. Another one of the reasons that they are used for these applications is their durability. When they are made properly, they have the capability to withstand the rigors of use in extreme environments. This might be space or a battlefield.

Wearable technology will benefit from the use of these boards, too. Since HDI PCBs are smaller and can help to increase battery life, they are popular for a range of different types of wearable tech, such as smartwatches.

More and more industries are likely going to be looking to enjoy all of the benefits that these boards can provide. Those who are trying to determine what sort of boards they should be using will want to seriously consider the HDI PCBs.

Less Power Usage

Another one of the biggest benefits of choosing HDI PCBs is the fact that they use less power. This will naturally lead to longer battery life. When creating any sort of handheld device or equipment that utilizes batteries, the longer the battery life, the better. Most consumers do not want items that need to be recharged constantly. They want a product that has a long battery life, and these high-density interconnector circuit boards can be an ideal solution for this.

Long Lifespan

The HDI PCBs also tend to have longer lives than other boards. One of the reasons for this is the fact that there is reduced degradation because of the heat. These boards have less heat transfer because the heat does not have to travel as far before it can escape the board. These types of boards do not have to deal with as much stress due to thermal expansion, either. The boards tend to be rugged and strong, and they have fewer perforations. They are built to last and can still provide the space that a larger board would provide.

Conductivity Management

With these boards, you can choose to fill the vias with nonconductive or conductive materials. These will help with the transmission between the components on the board. The boards allow for blind vias and via-in-pads components to be placed closer together. This will typically help to improve the functionality of the board. This is because the transmission times will be reduced along with reductions in crossing delays.

The signal strength will be increased, which is another one of the reasons that many people are opting for HDI PCBs today. The blind and buried vias make for a more efficient product, and you can expect better signal integrity. Ultimately, this can allow for better overall products.

A Cost-Effective Option

Another one of the benefits of using HDI PCBs is their cost-effectiveness. They are smaller and often cost the same or less than other boards that would take up more space. These boards are a good solution for those who are looking for a quality option. You will not have to spend more money – or take up more space with boards – to get the functionality you need.

Move Forward with Your Own HDI PCBs

Now that you have a better understanding of HDI PCBs and the types of benefits they can confer, it’s time to consider whether they are right for you. Take the time to learn more about what we can offer at Advanced Circuits. We can provide fast turnaround times for the boards you need. We also have software available which will allow you to create your own boards. Best of all, our high-quality design software is free. If you are looking for the very best in circuit boards, Advanced Circuits can help.